Posted 10/19/2021 18:31 (#9277232 - in reply to #9267640) Subject: RE: Trimble Nav II NMEA out to JD 2600 help
SEQ, Australia
You need the harness, Null modem adapter and you then have to configure the display to output GPS via the AutoPilot Port. You will also have to drop the LLA Precision value back to 6 decimal places so as to not overload the 2600 Display, and enable the NMEA Strings - GGA, GSA & RMC. On the John deere side you need to enable the Serial/Com Port 1 and set it for 19.2K baud rate.
Trimble Nav II NMEA out to JD 2600 help
