|
Ohio | I had a post a few weeks back on an old leg grain elevator that was V-shaped. I am probably going to re-fab the head and boot. With a 36" head pulley what size boot pulley would I need to run to straighten this out. In my case if there was a "dog leg pulley" I don't have one, and am not quite sure what it looks like. I did not see this thing before it showed up in front of my shop. Do any of you out there have any suggestions, or any pictures of anything like this.
I currently have a 3000 BPH leg that is connected to all of my bins, I was going to add a new wet leg to simply run wet corn to a wet storage for the dryer. Then use the existing leg for dry corn from the dryer/ and for beans etc. Is there any problem dumping 700-1000BPH out of the dryer into this leg, or do I need some type of surge tank from the dryer. I would go with air, but I'm on a budget this year. Any advice always appreciated. Thank you,
John | |
|