|
Boone, Iowa | I researched the trannys in the parts CD and see the 30/40/50 use the same number of clutch plates in master clutch and all of the trans clutch packs. The 20's use the same number in the master clutch but use one less friction and steel plates in the tranny. I think from what you are telling me, is if I add the water-cooled aftercooler that goes in the intake manifold, get the pump and injectors to the diesel injection shop, I could set it to 250 engine h.p. This would give me about 210 h.p. at the pto. | |
|