|
East Central Ia | What Raven monitor were you using? I am using this setup and all i had to get was the Raven adapter cable and a foot switch to control my on/off. I do remember having some trouble like this but i can't remember what the problem was. I am thinking it was something in one of the setup screens about using a secondary switch or something. I am assuming you have the control modules that convert everything to CAN BUS, or do you have your insight hooked up to your raven monitor? I had some trouble with a couple connections on my liquid control module and I think it showed the master switch working on the Insight screen but wouldn't turn it on in the run screen. Couple things to check at least i guess.
Jake | |
|
Master Switch-InSight-Raven On/Off valve
