|
Belmont WI | Looking for a insert that goes into a 5x5 square tube. It looks like you drive in nut and then screw bolt into nut. This is on Lexion corn head, the bolt in question holds on hinge on outside row snout.
Option 2 is drill a hole in bottom of tubing so we can get nut and socket up there to tighten up.
The bolt is M10 that goes into this nut.
option 3 is cut hole bigger and weld nut in another piece that gets welded back in place. The bracket that holds hinge sits flat on 5x5 tube. | |
|