|
| We have a 2388, and having problems with the concave clearance indicater. When you adjust the clearence it should show a reading on the right hand corner post, all we get is 0.0. first thing we did was recalabrate, acording to the owners manual. No luck,then replaced the pot (the senser that is attached to the cocave itself) again no luck. Next had dealer come out with new header controler box,(this is the box under right hand arm rest), again no luck. Next checked wires for resistance all are ok. Tried and new console on right handcorner post it's ok. We're running out of ideas,and need some help PLEASE!!!!!!!!!!!!!!
Edited by walsh1 10/8/2008 21:41
| |
|