|
Cen IL | I have taken a 60 series rotor and am doing some heavy mods to it. I removed the cast elephant ears bracket and turned a 7" diameter hub to replace it. I have a 7gauge cone that will slide over the hub and taper up to the same size as the original IH cone. This gives it a "bullet nose" if you will. This will help evenly feed the material into the rotor. I am mounting OEM caseih afx spirals to the bullet nose. I skinned the rotor and recovered it with 10 gauge. I am putting on the St. John welding bar mount kit and loewen notched cylinder bars. Will have pics when finished if anyone cares to see them. jeff | |
|
Anyone using the "spiral feed rotor" on Case-IH combines?
