|
| the adapter kits offered for the ezboom are only for raven rate controllers, but not the raven 661. if the rate controller (and rate controller harness) is not a raven then it most likely will require a complete kit rather than an adapter harness that plugs into the rate controller's harness. it will require: ezboom controller, cab harness, power cable, extension cable, implement harness, valve/flowmeter cable, and a boom section cable.
another thing to look at is whether or not the flowmeter is a 6 volt meter or a 12 volt meter. if it is a 12 volt meter, then the ez boom system will not work. | |
|
EZ-Boom + Case SPX 3185
