|
Western EC Iowa | We either use clay tile if we have the right size to fit back in, or put plastic in. If it is just one piece, prolly go with clay, if more than that, you can put in connectors that go into the clay and over the plastic. Or you can cut plastic to fit and make a coupler to go over top by cutting about an 8" piece of the same size or one size bigger, cutting about 1/3 of the tile out the long way so you can slide that over the top of the joint. OR, you can use heavy plastic garbage bags to cover up the joints so you don't get another suckhole. I'm sure there are other ways as well, looking forward to seeing the replys. Ben | |
|
Best way to repair old clay tile?
