|
Sunnyvale, CA | Does the EZ-Steer controler have a white label on the plastic cover showing mounting locations? If there is no white label, then the controller is old stock and you need to get it back to your dealer and get a new one with T2 installed. If the EZ-Steer came with cable 52763 for the EZ-Guide Plus, your dealer might have sent you a unit that has vers 3.01 installed in the EZ-Steer controller. To upgrade the firmware you need to follow the instructions on the web site for using EZ-toolbox very carefully. Alternatively, get your dealer to flash the proper firmware for you. You will need cable 62974 to connect the EZ-Steer controller to the EZ-Guide 500 power cable part number 62817. I hope your dealer gave you cable 62974. | |
|