|
68340 | You probably would not want to run the machine as deep in the spring with sweeps. The shovels will then not be at the proper angle as the machine is only part way down. I bet the whole frame of the chisel plow would not be level. The front of the frame much lower than the rear.
The shovel will be pointed down to much in the front and the back wings of the sweeps will be out of the ground.
As you try and pull it through the field it will hop, that is the points will grab and release then grab again.
Voice of experience.
Maybe if you changed the shank and the shovel you might get it to work. | |
|
Dumb question? But why not..........
