We recently finished plumbing fertilizer and herbicide on our planter. I thought it turned out nice. We had to make spray booms from scratch since Deere doesnt offer them on a CCS planter. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/Herbicide%20boom%201.jpg)
The nozzle pitch is adjustable via a set screw. They lean back slightly in the picture below. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/herbicide%20boom%202.jpg)
Below is the herbicide flow meter mounted behind the vaccuum gauge and psi gauges for the herb & fert. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/PSI%20gauges%20for%20herb%20and%20fert.jpg)
The top Redball is fert, the bottom is herbicide. they are mounted 3 rows in from the outside of the wings. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/redballs%20for%20herbicide%20and%20fertlizer.jpg)
This is the fertilizer metering unit. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/fert%20flow%20meter%20assembly.jpg)
3 valves from trailer mounted on bottom step of planter. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/fill%20and%20trailer%20connections%202.jpg)
Tank plumbing on planter tank so we can run fert or herbicide thru it. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/filter%20assembly%20for%20herbicide.jpg)
And the trailer fill ports. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/fert%20and%20herb%20trailer%20hoses.jpg)
Also the monitor mounts in the 8430. Note that the raven harness is all stuffed behind the right hand console so that you dont have to look at it. ![](http://photos.imageevent.com/simscott/2008ccsdeereplanter/websize/monitor%20mounting%208430.jpg)
|