|
Bonanza, Or | Does it do the same thing in forward and reverse? If I had one that was walking off the wire I would check antennas first. I think you have two seperate problems. I think the stalling is a power problem at the SDU or the LRDU and the walking off the wire is an antenna problem. If you had a guidance box problem it should kill the reference antenna and the whole machine would safety out either on the wire or off the wire. With a bad antenna it can walk off the wire and then safety out the whole machine. Does the SDU wander? Ghosts as we call them are a real pain and time consuming to figure out. | |
|
Valley Corner System
