|
North west MN | I said I was using a full platform scale to calibrate the yield monitor I was not using the yield monitor to check the scale. I would not have checked the elevator scale if I wouldn't have been calibrating and had weighed it on a full scale. When 2 loads in a row are under 4000# and 4,160# on the gross and also under on the tare 750# and 800# compared to a full platform scale I think there is a pattern. Like my friend from the scale company said I can't use that end dump semi at the elevator with the small scale I will have to use my tandems. The strange thing is about 25% of the trucks dumped there are semis. | |
|
Is Split weighing a semi and end dump ok
