|
| Just found out what the problem was! If you hit escape when you are setting up the implement in the lightbar, it will screw up the swath width. In the field it will show that you have the correct swath width but will give you AB widths that are from your previous implement. To correct the problem you need to go through the new field process and change the implement to a different width, select the client, farm, field, and go all the way until you are ready to set the new AB line in the field. Now you have to reset your guidance again and make sure the implement is the correct width and you can reselect your client, farm, field and everything should work fine. Trimble just found this problem a few days ago and this was the second time that they heard of it. Probably be a fix in the next firmware that comes out. If anybody has any questions just let me know. | |
|