Viewing a thread - Cutting out welds- flush

Forums | Classifieds (97) | Skins | Language

You are logged in as a guest. ( logon | register )

Cutting out welds- flush	View previous thread :: View next thread
Forums List -> AgTalk Cafe	Message format

Pofarmer

Posted 10/7/2010 22:02 (#1387490 - in reply to #1387267)
Subject: Re: Cutting out welds- flush

Turn your oxygen pressure down to the same as your acetylene pressure. It let's you bolw out the weld, but keeps you from blowing clear through the piece.

Cutting out welds- flush - guessrow : 10/7/2010 18:17
- Re: Cutting out welds- flush - plowboy : 10/7/2010 18:57
  - Re: Cutting out welds- flush - Dave Cen.Ia : 10/7/2010 23:44
- RE: Cutting out welds- flush - ry0972 : 10/7/2010 20:19
- RE: Cutting out welds- flush - JoshuaGA : 10/7/2010 20:26
  - RE: Cutting out welds- flush - Angus in ncmo : 10/7/2010 21:38
- Re: Cutting out welds- flush - MarlandS : 10/7/2010 20:28
  - Re: Cutting out welds- flush - JoshuaGA : 10/7/2010 20:33
    - Re: Cutting out welds- flush - MarlandS : 10/7/2010 20:41
- Re: Cutting out welds- flush - Thud : 10/7/2010 20:50
  - Re: Cutting out welds- flush - headerpuncher : 10/7/2010 21:43
  - Re: Cutting out welds- flush - G. DAY : 10/8/2010 00:23
    - Re: Cutting out welds- flush - G. DAY : 10/8/2010 00:37
- Re: Cutting out welds- flush - Pofarmer : 10/7/2010 22:02
- RE: Cutting out welds- flush - msb : 10/7/2010 22:05
- Thanks all.... - guessrow : 10/7/2010 22:58
  - RE: Thanks all.... - Angus in ncmo : 10/7/2010 23:16
  - RE: Turn the angle on the cutting torch, - 95h : 10/7/2010 23:36
- Plasma Torch - Matt NCOK : 10/8/2010 00:12
- Use a scarfing tip.... - MDARE : 10/8/2010 12:18
  - Re: Cutting out welds- flush - scottnelsen : 10/8/2010 14:46
- Re: Cutting out welds- flush - wheat fallow : 10/8/2010 14:37

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)