|
southern MN | A few of the farm supply stores still have a selection of the wear parts on the shelves, but as plows are disappearing from the conventional ag scene thre are less and less of those. And the help doesn’t know much about it any more so you need to know what you need. Tractor Supply, runnings, Fleet Farm, Bongaars, etc. if they don’t stock these they might be able to order wear parts.
Shoup is good mail order. There are others.
Weiss and one or two others generally make most of the tillage parts, you can look at their catalogs or on line for specs.
If yours is a Case, it was probably designed by Oliver, which became White, which is now Agco. Match up your hole spacing to these brands when looking for wear parts.
Now, if this is an IHC plow, then you need to look for IHC type wear parts.
Going to a dealer will be very expensive, but an option. They often sell wear parts fairly competitive, but again molboard plowing is less popular than it used to be.
Edited by paul the original 3/28/2025 09:10
| |
|
mold board plow
