Hello, i will atach WinFlash just in case, but you really don't need it, the best aproach to config it via WebBrowser. You just need to connect the station via LAN cable, RJ45 to a computer, and the throu browser acces the ip that appears on Station monitor for example 169.254.1.0
There you may configure whatever you want you have a Great intuitive UI, something like a router configuration UI
It may not work, because its a used one, it may have different settings, in this case you must reset it by holding power button for 60 seconds.
About 24 hours logging look into -Post-Processing-Procedure file in atachment

AGSN_WinFlash_1.212_DeviceConfig_16647.pdf (280KB - 14 downloads)

Images.zip (416KB - 14 downloads)

v4.70 - WinFlash.zip (17116KB - 1 downloads)

-Post-Processing-Procedure.pdf (887KB - 15 downloads)

AGSN_542Rec_EnableGLONASS_16647.pdf (1063KB - 14 downloads)