Milford, IL | DAN SEWI - 3/25/2025 09:12
I have a bead bazooka but the biggest thing I found to make a difference is have a 1/2 air line going right from compressor tank to the tire. Unscrew the removable part of the stem, not just the core. Screw a quick connector on there (it wont thread onperfect but will be good enough for the job) and clip your 1/2 inch hose to that. I had an experienced tire service truck guy tell me that and it was the difference to get a 20.8R 42 seated tubeless on my combine.
Yep. Haltec 326 is the part number for the large bore adapter. Pic attached, the 1/2" gas valve is very surely not rated for 190PSI, just what I had on hand to connect the two fittings.
 (Resized_1000004604_1742915934842 (full).jpeg)
Attachments
----------------
 Resized_1000004604_1742915934842 (full).jpeg (283KB - 14 downloads)
|
Ag tire bead seater
