|
NW Iowa | I have a 625 that was put up in '08 on 3 phase
Used to run around 175k through it.
I start around 26-28%
Run 210 degrees, cool to mid 90's.
Don't see any cracking, unless you run the blower too hard.
I like my heat and cool.
When you get down around 22% it starts to fly through.
Do you have 3 phase?
 (KIMG0681 (full).JPG)
 (KIMG0846 (full).JPG)
 (KIMG0683 (full).JPG)
 (KIMG0692 (full).JPG)
 (KIMG0694 (full).JPG)
Attachments
----------------
 KIMG0681 (full).JPG (171KB - 5 downloads)
KIMG0846 (full).JPG (128KB - 4 downloads)
KIMG0683 (full).JPG (111KB - 3 downloads)
KIMG0692 (full).JPG (118KB - 2 downloads)
KIMG0694 (full).JPG (77KB - 1 downloads)
| |
|
Grain dryer efficiency.
