Posted 1/25/2025 06:33 (#11072557 - in reply to #11071644) Subject: RE: Magdrill that is advertised 2" cut depth
Northeast Indiana
You'll have to twist drill it to do both. No annular cutter/mag drill will be long enough to cut 3/8 thick then have to move 5 1/4 inch to start cutting the next hole.
You could annular cut one side, leave mag engaged change out to long bit and drill a pilot hole, flip and annular cut the other side lining up with the pilot hole
Magdrill that is advertised 2" cut depth
