Viewing a thread - Magdrill that is advertised 2" cut depth

You are logged in as a guest. ( logon | register )

Magdrill that is advertised 2" cut depth	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Fingers77

Posted 1/24/2025 13:11 (#11071771 - in reply to #11071644)
Subject: RE: Magdrill that is advertised 2" cut depth

The make 2" cut depth annular cutter bits.

My Evomag easily has more than a 2" plunge capacity.

IF the hole is large enough, they also make annular chuck extensions but they're reasonably large in diameter, iirc closer to 1".

Magdrill that is advertised 2" cut depth - MnDirtturner : 1/24/2025 12:10
- RE: Magdrill that is advertised 2" cut depth - c_mayer : 1/24/2025 12:12
- RE: Magdrill that is advertised 2" cut depth - jd4930 : 1/24/2025 12:43
- RE: Magdrill that is advertised 2" cut depth - ccjersey : 1/24/2025 13:02
- RE: Magdrill that is advertised 2" cut depth - Fingers77 : 1/24/2025 13:11
- RE: Magdrill that is advertised 2" cut depth - Hay Hud Ohio : 1/24/2025 13:35
- RE: Magdrill that is advertised 2" cut depth - E718 : 1/24/2025 13:36
- RE: Magdrill that is advertised 2" cut depth - kb ag : 1/24/2025 14:50
- RE: Magdrill that is advertised 2" cut depth - Lone Wolf Picker : 1/24/2025 22:46
- RE: Magdrill that is advertised 2" cut depth - massey175275 : 1/25/2025 06:33
  - RE: Magdrill that is advertised 2" cut depth - hillfarmer : 1/25/2025 06:41
    - RE: Magdrill that is advertised 2" cut depth - massey175275 : 1/25/2025 07:34
- RE: Magdrill that is advertised 2" cut depth - dvcochran : 1/25/2025 07:39
- RE: Magdrill that is advertised 2" cut depth - Duane in ND : 1/25/2025 13:06
- RE: Magdrill that is advertised 2" cut depth - GDAD : 1/25/2025 20:35
- RE: Magdrill that is advertised 2" cut depth - Bristol Hillbilly : 1/25/2025 22:21

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)