|
Holly Hill, SC | Ebay. What I have shown is the 1/2" barb version. Next time I would buy the 1/2" threaded and use a coupling and reducing bushing to go to the John Guess quick poly line. For how cheap they are you might want to buy a few extra. In the past I used the a 2500B solenoid. Could get them a few years ago for under $50, now $120.
For my JD 4730 the wires were already on the boom and in the armrest. Nothing to do but add a toggle switch and hook a solenoid at the boom.
JD 408R, I had the dealer program the monitor or module to say it had fence nozzles installed. Then added the pigtail and solenoid to the boom using the existing harness and cap that was on the plug.
Edited by shulerfarm 1/21/2025 11:42
 (Screenshot_20250121_123149_Chrome (full).jpg)
 (Screenshot_20250121_123033_Chrome (full).jpg)
Attachments
----------------
 Screenshot_20250121_123149_Chrome (full).jpg (52KB - 5 downloads)
Screenshot_20250121_123033_Chrome (full).jpg (55KB - 4 downloads)
| |
|
How do you setup/use your fence row nozzles?
