Holland, Indiana (SW IN) | bigmoe - 1/13/2025 11:07
If they are cracking you need more clamps. Vibration is what's causing the break.
Think Bigmoe is right
Had an injector lines breaking "more than once on a CAT D4D and an IH 806D
Both fixed with extra clamps to keep from vibrating
Put some extra clamps with good rubber extra places
Vibration causes breaks
Dan
Add I'm seeing 2 places I would put a clamp on 2 lines --where they are coming up and where the 2 lines are horizontal
Easy to make clamps 2 pc of metal drill a hole just add rubber and a bolt
Edited by Dan Loehr 1/13/2025 15:26
|
Repeated failure of Diesel Injection Line
