Southern PA | k350024v - 12/2/2024 09:04
Re-seal, Dowel pin (dont buy the kit you can make a tab yourself). If your doing the head gasket, stud the head or use 12.9 socket head cap screws and heavy duty washers. Dont bother with bearings 90k is nothing.
Any other work would be depending on how much horse power you would like out of it.
I agree, 90k is nothing for bearings, IF it was properly maintained. If any question on prior maintenance, pop the pan off, and take a peek at the bearings. Easy-peasy when the engine is out! |
12V 5.9 Cummins Refresh.
