|
King City, Mo | We got a $500 grinder this summer.
Ran it on the allis WD and ground around 10 probox worths of popcorn.
The WD has to be full throttle and burns 1 gallon of gas or more per probox…..
I was trying to unload and grind at the same time and screwed up stuff as the wd couldn't hack it….. pto shear bolt on tractor and ended up messing up the coupler to the gear box on the shaft, smoked a belt on the grinder and broke a chain that was shot.
Put the deere 4455 on it while waiting for used pto shaft to come in.
I can run the grinder slower and get more cracked corn not all fines. Also can unload and grind at the same time.
I made a stand to hold a probox above the auger and that is handy.
We arent running any screens in the grinder.
Grinder takes no hydraulics and i swing the augers out by hand.
I wish we woulda bought a grinder like this years ago.
 (IMG_6703 (full).jpeg)
 (IMG_9402 (full).jpeg)
 (IMG_9403 (full).jpeg)
 (IMG_8892 (full).jpeg)
Attachments
----------------
 IMG_6703 (full).jpeg (325KB - 5 downloads)
IMG_9402 (full).jpeg (295KB - 3 downloads)
IMG_9403 (full).jpeg (287KB - 2 downloads)
IMG_8892 (full).jpeg (222KB - 1 downloads)
| |
|
Talk about feed grinders again
