Posted 11/29/2024 12:56 (#10987651 - in reply to #10987449) Subject: RE: Talk about feed grinders again
Ripley, Ontario Canada
I run my NH352 with 45 pto hp and 1/4 inch screen lots of power especially in corn. Those loading augers likely won’t go under a hopper trailer but you should be able to find a 4 or 6 inch electric auger that you can shove under the trailer. I usually feed my mixer with a 4 inch auger works fine. Gehl parts my be hard to find but NH might be getting that way too.
Talk about feed grinders again
