|
| Installed a Largo brand stationary hot washer a couple years ago. Have never been pleased with the burner and drafting on the coil. Cleaned the burner. Cleaned LP valve. New gas regulator. Dealer cleaned the soot off the burner coil. Temp will show 200 degrees out on the coil vent and is now down to around 80 degrees at the water pipe out of the coil. The burner ring has a lot of soot on it so I believe it is an air or drafting problem. Does anyone else have a Largo hot washer that they have had issues with. Kind of ran out of ides of what to look at and correct. Any suggestions?
| |
|
Largo hot pressure not hpt enough?
