Near Intersection of I-35 & I-90 Southern Mn. | I have one for my InCommand 1200. I believe it came from Ag Leader themselves. As I recall there was a two camera model and a four camera model. I got the two camera model which would plug into CabCam cables or CabCam cameras. Since I use an Overview camera, I needed an adapter to change from the CabCam connector to the Overview connector. The adapter came from Dakota Micro. I then used a long Overview extension cable to reach the camera on the rear of the planter.
This was sort of the long way around since the first cable came from Ag Leader, the adapter from Dakota Micro, the extension from Dakota Micro and the camera came from an OverView kit.
So for your situation I believe you might need to go the Ag Leader route. Their cable should mate with your CabCam cameras although it is quite likely you will need a CabCam to CabCam extension that should be available through Dakota Micro.
At least it works quite well although the color is a bit off in my old camera. It is still very useful for traffic etc.
As I remember it, the Integra did not have enough power to handle cameras so another source and a relay got involved. The wiring adapter harness got to be kind of a jungle. The 800 & 1200 apparently can handle the current needs of the cameras so the cable is different and doesn't need the relay and other power source. It is much more straight forward and just plugs in the back through the unused port. This might explain why you did not see a cable for the 800 & 1200s.
Edited by tedbear 11/14/2024 17:28
|
Agleader InCommand 800 & Cabcam?
