|
N Central IA | I’m using a steercomand 7500 to feed RTK into my 2630 for planter control only. I’m pulling my gps from port b on the 7500, when I have the map section pulled up and watching the tractor and planter on the map it takes forever for the planter to follow the tractor on turns, it may take 100-150 yards for it to get squared up. I plugged the 2630 into a geosteer which I was using before and the planter followed the tractor as expected. Double checked all settings from geosteer and port b and they are all the same gga, gsa, rmc 5 hz output baud 19200. Any thoughts, thanks. | |
|
Ag leader rtk into JD 2630
