|
SE Michigan | It's just pipe.
Find the same size or one close to it and weld the length's together as needed. I bought a 25' tarp system from a guy on FB market a few yrs ago that was about 100 miles away. I did not want to haul my trailer that far so I brought a saw and cut the pipe into 2 pieces to load in a pick up with an 8' bed.
I only needed 14' of the tarp system so I welded them back together in that length. Just laid it on the shop floor and tacked it about in about 6 places then welded it solid. It may have not been perfect, but it rolled the tarp just fine | |
|
Replacing small pipe on grain trailer tarp
