Posted 8/31/2024 07:58 (#10873302 - in reply to #10873026) Subject: RE: 8000 series Deere tractor
MN
ae4020 - 8/30/2024 21:24
1.Move spare fuse to diag
2. Use turn signal to get to controller
3. Turn flasher switch on and back off
4. Use turn signal to get to address
5. If you need to adjust turn flasher switch on then off. Then pull the turn signal switch to flash to switch
didgets. Turn flashers on then off to save.
8000 series Deere tractor
