|
Ogallala,NE | 96 t800 n14 9 speed.
Took it apart for transmission work. Clutch is only a couple years old. Ready to go back together and notice the clutch release fork has been hitting the pressure plate. Also noticed the clutch brake is well worn on one side but no wear on the other side.
Pivot shaft bushing feel reasonably good, fork looks good, input bearing retainer looks like new.
I think truck originally had 1700 ft lb clutch and this haldex reman is 1860 ft lb rated. Is this pressure plate deeper or something?
Ideas?
 (20240830_171315 (full).jpg)
 (20240830_171403 (full).jpg)
Attachments
----------------
 20240830_171315 (full).jpg (122KB - 12 downloads)
20240830_171403 (full).jpg (99KB - 11 downloads)
| |
|
kenworth clutch release fork hitting pressure plate
