Posted 8/21/2024 22:09 (#10861023 - in reply to #10831327) Subject: RE: Variable Rate on a John Deere 787 Air Cart
NW MN
Josh4520 - 7/29/2024 15:23
ShopTeacher - 7/22/2024 23:32
You should be fine connecting the Deere drive directly to the meter shaft. You’ll need an AL Strip Till Module and cabling to control it with your Integra.
Do you have the part numbers for the cabling, in particular the cable from the module to the hydraulic drive?
4001528-X , x meaning there are several length options available.
Then you’ll need an implement cable and you are set.
Variable Rate on a John Deere 787 Air Cart
