AgTalk Home
Search
Forums
|
Classifieds (50)
|
Skins
|
Language
You are logged in as a guest. (
logon
|
register
)
2366 pro 700 not reading ground speed
View previous thread
::
View next thread
Forums List
->
Precision Talk
Message format
Flat
Threaded
Nested
farmer_white
Posted
8/11/2024 09:36 (#10846818 - in reply to #10846645)
Subject:
RE: 2366 pro 700 not reading ground speed
SC WI
Pro 700 speed source is set to wheel.
0 to .8 mph- A post reads 0, pro 700 reads 0
.8 to 2.1 mph A post reads correctly, pro 700 reads 0
2.2 and up A post and pro 700 read correctly.
Weak signal at low speed? Is the A post less sensitive than the CAN conversion into the pro 700?
2366 pro 700 not reading ground speed
-
farmer_white
: 8/8/2024 21:10
RE: 2366 pro 700 not reading ground speed
-
torn
: 8/9/2024 06:28
RE: 2366 pro 700 not reading ground speed
-
tedbear
: 8/9/2024 07:38
RE: 2366 pro 700 not reading ground speed
-
farmer_white
: 8/9/2024 08:38
RE: 2366 pro 700 not reading ground speed
-
tedbear
: 8/9/2024 12:07
RE: 2366 pro 700 not reading ground speed
-
farmer_white
: 8/9/2024 16:14
RE: 2366 pro 700 not reading ground speed
-
torn
: 8/9/2024 13:03
RE: 2366 pro 700 not reading ground speed
-
farmer_white
: 8/10/2024 07:18
RE: 2366 pro 700 not reading ground speed
-
tedbear
: 8/11/2024 07:34
RE: 2366 pro 700 not reading ground speed
-
farmer_white
: 8/11/2024 09:36
RE: 2366 pro 700 not reading ground speed
-
tedbear
: 8/11/2024 11:28
RE: 2366 pro 700 not reading ground speed
-
farmer_white
: 8/11/2024 12:46
RE: 2366 pro 700 not reading ground speed
-
torn
: 8/12/2024 06:10
RE: 2366 pro 700 not reading ground speed
-
farmer_white
: 8/13/2024 12:29
Jump to forum :
Forums List
----------------------
+ Machinery Talk
+ Where Can I find?????
+ Crop Talk
+ Stock Talk
+ AgTalk Cafe
+ Kitchen Table
+ Precision Talk
+ Drone Talk
+ Computer Talk
+ Market Talk
+ Test Forum
+ FAQ & Support
Search this forum
Printer friendly version
E-mail a link to this thread
(
Delete cookies
)
2366 pro 700 not reading ground speed
