| I read a few posts about the possibility of connecting Bluetooth to the 750 terminal to download NTRIP.
I received a Bluetooth module in the RS232 standard in the form of a PCB (arduino) HC-05 from a friend
https://www.theengineeringprojects.com/2019/10/hc-05-bluetooth-module-pinout-datasheet-features-applications.html
I connected the RX and TX pins to plug A. 5V power supply from USB. Dongle paired with the phone, Lefeburge application running. According to the phone, the Ntrip fixes are working, the LEDs on the dongle are flashing.
The terminal is set up according to the forum descriptions. and unfortunately he doesn't see any corrections in the RTK status.
How to physically check whether the dongle is actually transmitting to TX? current meter? :)
Thank you for any suggestions.
Edited by kufcio 8/4/2024 11:43
(Screenshot_20240802_132725_Lefebure NTRIP Client (full).jpg)
(hc 05 (full).jpg)
Attachments ---------------- Screenshot_20240802_132725_Lefebure NTRIP Client (full).jpg (330KB - 68 downloads) hc 05 (full).jpg (95KB - 71 downloads)
|