|
NW IL | The Ag Leader Intellislope system uses a “water management module” to control the tile plow. In the attached picture the water management module is PN 4003100.
A new soil-max tile plow kit from Ag Leader (PN: 4100470) costs $5795.
To use the tile plow kit you will need either an Ag Leader I Integra monitor or an InCommand 1200 monitor. Both monitors have intellislope “unlocked” from the factory.
In addition to the monitor you will need an RTK rover mounted on the plow. You can utilize most any RTK rover (Ag Leader, Trimble, John Deere, Outback, etc) as long as it can output specific NMEA strings.
You will also need a gps adapter harness to connect the intellislope module to your Deere receiver. Cost is ~$100 for a 4ft adapter or $125 for a 12ft.
One additional thought: if you are going to use a John Deere 3000 or 6000 RTK rover on the tile plow you need to turn the TCM in the Deere receiver “off”. The water management module has built in terrain compensation already. You do not want both the Deere receiver and the module doing terrain compensation at the same time.
Edited by swenzel 8/3/2024 07:29
 (IMG_9868 (full).png)
Attachments
----------------
 IMG_9868 (full).png (20KB - 34 downloads)
| |
|
Intellislope
