|
Kendall County, IL | Technically a GVM Mako…
My issue is above 12 mph while running autotrac this machine has a hard time staying on the line and seems to over correct, sometimes drifting as far as 12” away from guidance line one way then 12" the other way. I’m guessing the steering linkage could be a factor as well but I was able to run 15 mph with the Raven integrated system and hold the line. What ATU adjustments should I make? The settings shown in pictures are the closest I can get to working okay.
Edited by ILSODGRWR 7/27/2024 06:15
 (IMG_1378 (full).jpeg)
 (IMG_1379 (full).jpeg)
Attachments
----------------
 IMG_1378 (full).jpeg (94KB - 67 downloads)
IMG_1379 (full).jpeg (87KB - 67 downloads)
| |
|
Dialing-in ATU300 on Spracoupe
