|
Central Illinois | Using an older Mayrath 10-71 swing-away auger. Probably 15 years old but very few bushels through it. How much sag before you tighten up the truss cables ? Between our loader tractor and Forklift, should be no problem to relieve the tension on the cables by supporting the tube from each end. . Thought just tighten them up a little at a time and straighten it out a bit. Is there an actual specified bow allowed when they assemble them.
 (IMG_3845 (full).JPG)
 (IMG_3846 (full).JPG)
 (IMG_3847 (full).JPG)
Attachments
----------------
 IMG_3845 (full).JPG (70KB - 87 downloads)
IMG_3846 (full).JPG (78KB - 76 downloads)
IMG_3847 (full).JPG (88KB - 76 downloads)
| |
|
Auger Truss Cables
