|
Faunsdale, AL | I’m going to have to assume the 460 is set up correctly still. I just can’t see the display well enough to catch anything I don’t have time to study.
This whole situation is temporary since I already have the more capable equipment that will do auto steer an swath control, but it would sure be nice to find the magic trick to restore it to normal for the next couple weeks!
I’ll see what I can see. Sometimes in the correct light environment I can see more. I haven’t changed anything, so if any setting has gotten changed it was the result of a glitch.
I was able to confirm the boom section settings are entered correctly, 120,200,100,200,120 (20” spacing).
The card with the cal numbers for meter and valve (meter is correct, it’s on tag on meter, but can’t tell about the old valve) also had the old boom values that didn’t make any sense. The machine has had new booms installed so maybe the original was just a very different design.
Pictures of reference card
 (IMG_1033 (full).jpeg)
 (IMG_1032 (full).jpeg)
Attachments
----------------
 IMG_1033 (full).jpeg (126KB - 15 downloads)
IMG_1032 (full).jpeg (141KB - 15 downloads)
| |
|
Raven 460 manual rate control
