Near Intersection of I-35 & I-90 Southern Mn. | sunman - 6/7/2024 14:55
What cable are you using to adapt to the STMM? I'd check power to the sensors that are not reading. If you don't have power, it's likely because of the adapter and position of the power and ground pins.
Good idea, since all the rows seem to work with the other monitor, the problem may be with the adapter cable(s) that go from the STTM to the planter frame harness. The adapter cables may not be the correct ones. There are many adapter cables that "look" the same and mate but are using different wiring patterns. This is very common when dealing with Dickey John systems. Sometimes they use Power/Ground with one wiring pattern, sometimes a different wiring pattern. I believe this was an attempt to make life difficult for us.
A simple test would be to test for power and ground on a row that works with the STTM and adapter cables. You will then know which pins do what. Then check for power to ground on a row that doesn't work. You should get the same results. If not, the adapter cables are incorrect or faulty. |
White 5100 and STMM
