Viewing a thread - Welding on a rim with mounted itre

You are logged in as a guest. ( logon | register )

Welding on a rim with mounted itre	View previous thread :: View next thread
Forums List -> AgTalk Cafe	Message format

John Burns

Posted 6/8/2024 00:02 (#10767444 - in reply to #10767403)
Subject: RE: Welding on a rim with mounted itre

Pittsburg, Kansas

I didn't think about that.

A person would sure want the tire beads knocked off the rim with an air gap. Maybe a fan blowing for a while if either was a potential problem.

Welding on a rim with mounted itre - Buster 50 : 6/7/2024 20:23
- RE: Welding on a rim with mounted itre - tommyw-5088 : 6/7/2024 20:31
  - RE: Welding on a rim with mounted itre - twraska : 6/7/2024 21:19
    - RE: Welding on a rim with mounted itre - illinidirtfarmer : 6/8/2024 09:22
- RE: Welding on a rim with mounted itre - John Burns : 6/7/2024 20:32
- 300 psi????? - John Burns : 6/7/2024 20:40
  - RE: 300 psi????? - jeff gordon : 6/7/2024 20:55
    - RE: 300 psi????? - Aussy Harold : 6/7/2024 22:01
      - RE: 300 psi????? - John Burns : 6/7/2024 23:59
  - RE: 300 psi????? - Thud : 6/8/2024 19:47
- RE: Welding on a rim with mounted itre - Badger : 6/7/2024 20:40
- RE: Welding on a rim with mounted itre - Badger : 6/7/2024 20:40
- RE: Welding on a rim with mounted itre - ManiaPlus : 6/7/2024 22:29
  - RE: Welding on a rim with mounted itre - John Doe : 6/7/2024 22:47
    - RE: Welding on a rim with mounted itre - John Burns : 6/8/2024 00:02
    - RE: Welding on a rim with mounted itre - ccjersey : 6/8/2024 09:19
- RE: Welding on a rim with mounted itre - HedgeCotton : 6/8/2024 09:15
  - RE: Welding on a rim with mounted itre - John Burns : 6/8/2024 19:49

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)