Viewing a thread - Welding on a rim with mounted itre

Forums | Classifieds | Skins | Language

You are logged in as a guest. ( logon | register )

Welding on a rim with mounted itre	View previous thread :: View next thread
Forums List -> AgTalk Cafe	Message format

Posted 6/7/2024 22:01 (#10767360 - in reply to #10767294)
Subject: RE: 300 psi?????

North East Wimmera district of Victoria.

My compressors have a "blow off" set just above [in pressure] the cut off switch for the motor driving the compressor.

I could go to lunch and it would never go over 120 lb/sq-inch.

Top of the page

Bottom of the page

Welding on a rim with mounted itre - Buster 50 : 6/7/2024 20:23
- RE: Welding on a rim with mounted itre - tommyw-5088 : 6/7/2024 20:31
  - RE: Welding on a rim with mounted itre - twraska : 6/7/2024 21:19
    - RE: Welding on a rim with mounted itre - illinidirtfarmer : 6/8/2024 09:22
- RE: Welding on a rim with mounted itre - John Burns : 6/7/2024 20:32
- 300 psi????? - John Burns : 6/7/2024 20:40
  - RE: 300 psi????? - jeff gordon : 6/7/2024 20:55
    - RE: 300 psi????? - Aussy Harold : 6/7/2024 22:01
      - RE: 300 psi????? - John Burns : 6/7/2024 23:59
  - RE: 300 psi????? - Thud : 6/8/2024 19:47
- RE: Welding on a rim with mounted itre - Badger : 6/7/2024 20:40
- RE: Welding on a rim with mounted itre - Badger : 6/7/2024 20:40
- RE: Welding on a rim with mounted itre - ManiaPlus : 6/7/2024 22:29
  - RE: Welding on a rim with mounted itre - John Doe : 6/7/2024 22:47
    - RE: Welding on a rim with mounted itre - John Burns : 6/8/2024 00:02
    - RE: Welding on a rim with mounted itre - ccjersey : 6/8/2024 09:19
- RE: Welding on a rim with mounted itre - HedgeCotton : 6/8/2024 09:15
  - RE: Welding on a rim with mounted itre - John Burns : 6/8/2024 19:49

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)