|
Western NY | Installed a ATU 300, 6000 globe and 2600 in a 4840. The ATU is not showing up on the display so I can't get Autotrack to work. Need to calibrate the ATU but it isn't showing up on the home screen. Think I have all the wiring hooked up right. The display turns on/off normally and the resume button lights up. I had to move the 2600 and Greenstar harness from another tractor bc they are on back order. Autosteer was working fine in the other tractor. All fuses in the harness are good. Guess I could plug in the ATU300 from the other tractor to see if the new ATU is bad. What else should I check for? | |
|
ATU 300 not working
