|
Kalona, IA | I deleted and did as you said, and shore nuff, I got much further in the setup process. Couldn't get the motor to run so took the Integra to the local Dealership and he finished setting up the 12v PWM part with numbers he found on AL'S website. Motor still didn't run, but switch and everything else functions. I decided to check and see if motor runs with a 12v battery, nothing. No spark at all or amperage draw. Is it a variable speed motor and should there have been some attempt to run? I'll see if I can include a picture of it. The heat sink is covering the Brand etc of the motor. Having a heat sink makes me believe it's variable speed as that's what regulates the gallon rate instead of a recirculation method.
 (17172861688292604863677734806166 (full).jpg)
 (17172862625535799673572024637709 (full).jpg)
 (17172863147183724838335349218929 (full).jpg)
Attachments
----------------
 17172861688292604863677734806166 (full).jpg (100KB - 45 downloads)
17172862625535799673572024637709 (full).jpg (77KB - 37 downloads)
17172863147183724838335349218929 (full).jpg (84KB - 44 downloads)
| |
|
Application Rate Module: Not Found, Why? Frustrating!
