|
Ontario Canada | so had an improvement today on this issue. I turned off 3D compensation and now acquires the line pretty darn good. Had to adjust the sensitivities a bit but it’s acting more like the WAAS receiver while acquiring the line.
Although while online the sprayer is slightly going side to side. Displays show 2-3” error as it slowly wanders side to side. I think with some more fine tuning I should be able to work with this now.
So even with the TCM disabled on the Deere receiver the issues appeared to be on raven’s 3D compensation side of things.
 (44A393C2-7DB9-4B2A-98DC-99A5CCAEB51D (full).jpeg)
 (5302ACEE-6AE6-43DB-807D-F7DADB9E2306 (full).jpeg)
Attachments
----------------
 44A393C2-7DB9-4B2A-98DC-99A5CCAEB51D (full).jpeg (140KB - 41 downloads)
5302ACEE-6AE6-43DB-807D-F7DADB9E2306 (full).jpeg (110KB - 33 downloads)
| |
|
Deere RTK on Caseih Sprayer problem
