|
Northeast NE | I have and ag leader incommand 1200 running a 7500 with terra star c-pro and steady steer. Second year using this combo, was ontrac 3 prior. Been having the gray gps error message come on at bottom of screen which in turn kicks the auto steer off. Typically has always kept the green satellite showing full convergence. If you wait 3-5 seconds can reengage auto steer. Has also occasionally showed gps degraded then dropped to the yellow satellite. A couple times has given warning for the hz rate being too low. When that occurs, have to turn display off then works after restarting. Have tried a different receiver, scm, receiver to display cable, scm to display cable, main display cable, ethernet cable, power cable, and different incommand as well. Acts up on waas and terrastar both. Can be very intermittent. The only changes this year was adding an iso hijack cable to run a dry spreader. At a loss as to what to try next. Any help or insight is appreciated. | |
|
Ag Leader Incommand 1200 with 7500 steady steer gps error
