THANK YOU Ted! I think you have my planter configuration all figured out! I tried multiple times setting up the Integra and kept getting the Multi-Unlock request. I finally got it setup to not ask for that but then the Error kept showing up. I think my problem is that I was mistakenly using "Planter" in my configuration setup when I should be only using liquid setup as my Planter is being operated by PP 20/20 anyhow and not by the AgLeader. I do have the Raven flowmeter and divided 1652 by 10 = 165.2, correct?

I also tried it with planter down so the Implement switch would be triggered. I used and ohm meter to check switch and didn't get a reading at all. would that indicate a bad switch?   I jumper-ed the module to bypass the switch, but of course got no reaction since my Integra setup is wrong anyhow. 

I'll let you know how it turns out. Wish me luck and WISDOM!!