|
Eastern Ontario | Thanks for the info. It has been a long time since I set up an OnTrac, but I remember an issue involving GPS. This morning I realized that I hadn't fully set up the receiver, and maybe that was the issue I had in the past. I have a 7000 receiver that was on and InCommand, so I had to do the force connect, which gave me GPS signal. However, this morning I found the article on the Knowledgebase article with instructions on how to configure the receiver. When it is force connected it will only have the GGA string at 1hz, and it looks like I need a null modem cable to configure port A.
| |
|
Ontrac 2 to Integra
