Fairfield County, Ohio, USA | Which connector is on the planter harness that you have now? I can't tell which of your pictures indicate which thing.
KPMII requires muxbus (Kinze) sensors. The planter side of the harness would have a 3-pin connection, usually Weather Pack. All of the sensors plug into the same cable. When you first connect a monitor to that cable, you have to first unplug every sensor, and then plug them in row-by-row in order, for the system to learn which sensor lives where.
Dickey-John style has an AMP connector, just like in your IMG_3912. Every sensor has its own wire in that connector, so you can just plug it into a monitor, and then the monitor will inherently "know" which sensor goes with which row (based on which pin does what).
Edited by aNullValue 5/4/2024 14:03
|